PSC-LGTC Series · Hands-Free Suspended Load Control

PSC LoadGuider® Anti-Tangle Tagline

Control the Load. Keep Hands Away.

A high-visibility, tangle-resistant crane guide rope engineered to control suspended-load swing, rotation and drift while keeping operators clear of pinch zones and load paths.

View Product Details
PSC LoadGuider Anti-Tangle Tagline complete yellow guide rope with locking carabiner
18 mm Overall rope diameter
18 mmOuter diameter
6 mmRigid Polyex core
10-45 ftEight standard lengths
PSC-LGTCProduct series
The Challenge

Ordinary ropes can create new hazards during load control.

A conventional tagline can tangle, coil, snag, fray or lose grip when contaminated, drawing the operator closer to moving loads and rigging.

01

Tangling and Coiling

Flexible ropes can twist around themselves, load corners, rigging and deck fittings.

02

Wet or Oily Grip Loss

Conventional ropes may become difficult to control in rain, mud, grease or drilling-fluid exposure.

03

Snag and Pinch Exposure

Knots, fraying and raised surfaces can catch and pull hands toward hazardous areas.

04

Load Swing and Drift

Uncontrolled suspended loads can rotate, collide with structures or move into personnel work areas.

The PSC Solution

Rigid at the core. Secure in the hand.

LoadGuider combines a shape-retaining Polyex core with a patented Helix over-braid to keep the tagline manageable throughout crane and rigging lifts.

01

Tangle-Resistant Rigid Core

The 6 mm Polyex inner core resists twisting, looping and coiling back on itself.

02

Helix Braided Cover

Stiff spiral over-braid improves grip in wet, oily and cold operating conditions.

03

Snag-Free Profile

No knots or raised working surfaces to catch easily on rigging or pinch points.

04

High-Visibility Identification

Bright yellow construction and colour-coded eyes support fast length selection.

05

Washable Cover

Dirt-repellent material can be cleaned to preserve grip and inspection visibility.

Engineered Tagline Construction

Designed for hands-free lifting, not adapted from ordinary rope.

Every construction feature supports cleaner deployment, steadier grip and fewer reasons for personnel to approach the load.

Shape Retention

The rigid core helps the rope deploy without collapsing into repeated twists and loops.

Grip Feedback

The Helix braid provides a tactile spiral surface for controlled handling throughout descent.

Strength Without Excess Weight

SK75/Dynex-75 fibre provides high strength at low weight for repeated lifting operations.

Available Lengths

Select the standoff distance for the lift.

Eight standard lengths are available, with colour-coded eye fittings for visual identification at the rigging point.

10-20 ftShort Range

PSC-LGTC-10, PSC-LGTC-15 and PSC-LGTC-20.

25-35 ftMedium Range

PSC-LGTC-25, PSC-LGTC-30 and PSC-LGTC-35.

40-45 ftLong Range

PSC-LGTC-40 and PSC-LGTC-45.

Technical Specifications

Built for industrial load guidance in demanding environments.

Specifications below are based on the PSC-LGTC Series Rev. 1.0 datasheet.

ProductPSC LoadGuider® Anti-Tangle Tagline
SeriesPSC-LGTC
Core MaterialPolyex fibre, 6 mm internal core
Outer Diameter18 mm, comprising cover and core
Cover / BraidingStiff over-braided Helix spiral
Fibre TypeSK75 / Dynex-75 high-strength fibre
ColourHigh-visibility yellow
Eye IdentificationColour-coded by length
Available Lengths10, 15, 20, 25, 30, 35, 40 and 45 ft
Tangle ResistanceRigid core and stiff cover; no knots or raised surfaces
Cover CareDirt-repellent and washable
Carabiner OptionANSI-rated twist-lock compatible; product page specifies 50 mm gate opening and ANSI Z359.12
OriginMade in Iceland
Applications

Remote load control across offshore and onshore lifts.

Use LoadGuider where personnel must influence suspended-load movement without direct hand contact.

PSC LoadGuider Anti-Tangle Tagline used to guide a suspended steel load during crane lifting
Application 01

Suspended Load Guidance

Guide suspended loads from a planned position while keeping personnel away from pinch zones, swing paths and direct hand contact.

Application 02

Crane and Rigging Operations

Control load swing, rotation and drift during lifting, transfer and positioning work without reaching toward the suspended load.

Additional Application

Industrial Load Positioning

Maintain safer separation while guiding equipment, steel, modules and other suspended loads toward their final position.

Safety Guidelines

Keep it taut. Keep it visible. Never wrap it around the body.

The tagline supports remote control only when correctly attached, positioned, inspected and handled.

01 — Follow the Hands-Free Principle

Never touch or grab the suspended load directly; use the tagline as the remote control connection.

02 — Keep the Line Taut

A slack tagline reduces load control and can create loops or a trip hazard on deck.

03 — Inspect Before Every Use

Check for cuts, abrasion, fraying, eye damage and core deformation; remove damaged equipment from service.

04 — Never Wrap Around Body Parts

Do not loop the tagline around hands, wrists, arms, the waist or any part of the body.

05 — Attach Securely

Use the approved carabiner or equivalent and verify positive locking before the lift begins.

06 — Plan Final Positioning

Use an approved hands-free push/pull tool where direct load-contact control is required.

!

Load Guidance Only

The PSC LoadGuider is a tagline for controlling load movement. It is not lifting slinging, does not support the load and does not make the fall zone safe to enter.

How It Works

Control swing and rotation from a planned position.

Attach the correct length securely before lifting. Maintain a clear operator path, keep the line visible and appropriately taut, and use controlled inputs without wrapping the rope around the body.

FAQs

Frequently Asked Questions

Selection, construction, maintenance and safe-use information for the PSC LoadGuider.

What is the PSC LoadGuider Anti-Tangle Tagline?
It is a tangle-resistant guide rope for controlling suspended-load swing, rotation and drift without direct hand contact with the load.
What prevents the LoadGuider from tangling?
Its 6 mm rigid Polyex core and stiff Helix over-braided cover resist twisting, looping and coiling.
What is the diameter of the rope?
The overall diameter is 18 mm, including its cover and inner core.
Which lengths are available?
Standard lengths are 10, 15, 20, 25, 30, 35, 40 and 45 ft.
Can the LoadGuider be used in wet or oily conditions?
The Helix braid is designed to improve grip in wet, oily and cold conditions, but the operator must still follow the approved lifting procedure.
Can the tagline be washed?
Yes. Its dirt-repellent cover is washable to support grip performance and clear inspection.
Can the tagline be wrapped around a hand or wrist?
No. Never wrap or loop the tagline around any part of the body.
Does LoadGuider replace a push/pull tool?
No. A tagline controls movement remotely; use an approved push/pull tool when final positioning requires direct contact with the load.

Replace ordinary rope problems with an engineered anti-tangle tagline.

Request a Quote
PSC LoadGuider Resources

Select, inspect and use the right tagline for the lift.

Download the official datasheet or request application guidance for your crane, rigging or suspended-load operation.

18 mm diameter with 6 mm rigid Polyex core
Patented Helix braided cover
Eight lengths from 10 ft to 45 ft
PSC-LGTC Series · Made in Iceland
Product Resources

Technical data and selection support.

Review the official product page and download the PSC LoadGuider datasheet for construction, part-number, care and safe-use information.

sales@pschandsafety.com
www.pschandsfree.com